Difference with UCS poles

A forum to discuss everything to do with pole vaulting equipment: poles, pits, spikes, etc.

Moderator: Barto

Jered63
PV Newbie
Posts: 9
Joined: Sun Apr 03, 2016 9:46 pm
Expertise: college sophomore vaulter
Lifetime Best: 16'2"
World Record Holder?: Renaud Lavillenie
Favorite Vaulter: Sam kendricks

Difference with UCS poles

Unread postby Jered63 » Sun Apr 03, 2016 9:53 pm

Hey everyone,

I've always been curious about Why UCS put there labels so far from the top of the pole. And I was also wondering if I buy a 13 foot UCS pole the max I can grip on this pole is only 12'6". What would be the pole progressions going from say a pacer fx to a USC spirit. Would a 15 150 PACER Fx be the same as a 15' 1.5" 150?

prueitt_r
PV Nerd
Posts: 104
Joined: Sat Mar 07, 2009 8:43 pm

Re: Difference with UCS poles

Unread postby prueitt_r » Mon May 02, 2016 1:18 pm

Hi,

NFHS(I think) rules require that you not grip closer to the top of the pole than 6". UCS puts their label there to meet this rule. If using another brand, technically, you should have a band of orange or red tape indicating where 6" from the top is so officials know you are not violating the rule. Not all officials call this in meets though, usually only the "official" officials will.

Depending on the flex, a 15 150 pacer is essentially the same thing as 15'1 150 UCS. There are minor differences that a really experienced vaulter would notice but otherwise not much difference. If you are bending a pole a lot and penetrating deeper than 18" into the padding, it may be time to get a lower flex number pole(lower flex means greater stiffness).

User avatar
Rhino
PV Pro
Posts: 271
Joined: Thu Aug 21, 2003 4:36 pm
Location: Florida

Re: Difference with UCS poles

Unread postby Rhino » Mon May 02, 2016 3:23 pm

No, high school rules do NOT require you to hold six inches from the end of the pole. They require you to not hold ABOVE the weight limit band. UCS ensures that six inches of pole are wasted for US high school use.

GasPasser
PV Whiz
Posts: 206
Joined: Sun Mar 03, 2013 4:24 pm
Expertise: Former HS vaulter - now 55-59YO Masters vaulter, and part-time coach
Lifetime Best: 13'6"
World Record Holder?: Renaud Lavillenie
Favorite Vaulter: Bubka
Location: New Jersey

Re: Difference with UCS poles

Unread postby GasPasser » Tue May 03, 2016 5:11 am

It has been my personal experience using both UCS and Pacer poles that the UCS poles are softer when using the same grip height.

That kinda makes sense when you think about it. If the 150 rating on the UCS is at 12-7 on a 13-150, but the 150 rating is at 12-11 on a 13-150 Pacer, the Pacer will feel stiffer when held at 12-7 (to match the max legal HS grip on the UCS),

When I go between Pacer and UCS poles, I mentally take 5 lbs off of the UCS weight rating to compare it to Pacer. So I think of a 13-165 UCS pole to be similar to a 13-160 Pacer.

I don't have any hard data, just my personal opinion based on "feel".

ras
PV Nerd
Posts: 110
Joined: Wed Feb 18, 2009 12:01 am
Expertise: Former College Vaulter, Fan, Parent
Favorite Vaulter: Tye Harvey
Location: Austin

Re: Difference with UCS poles

Unread postby ras » Mon Jun 06, 2016 12:40 pm



Return to “Pole Vault - Equipment”

Who is online

Users browsing this forum: No registered users and 24 guests